H3C Technologies H3C Intelligent Management Center - Manual (Page 30)

23
{
VLAN Management
2. Select all the components and click OK.
The Database Configuration window appears, as shown in
Figure 13 .
Figure 12 Database Configuration
3. Enter the password for the superuser, which is used for installing the IMC database.
4. Select the location for saving data files.
By default, the data files are stored in the \Program Files\imcdata directory of the IMC installation
path on windows or /opt/imcdata on Linux. In this example, the data files are stored in
E:\Program Files\imcdata. You can also click Browse to customize the data file location.
Make sure the folder path is not a Windows shortcut or Linux symlink. Then IMC checks whether
or not the folder path exists and is accessible on the database server. When the path is invalid,
IMC quits the deployment. Then you must create the data file folder on the database server and
restart the deployment.
5. Click Next.
The Configure Web Service Port window appears, as shown in
Figure 14 .