H3C Technologies H3C Intelligent Management Center - Manual (Page 45)

38
11. Perform either of the following operations:
{
To start to deploy IMC NTA, select Open deployment monitoring agent.
{
To continue to install other IMC components, select Install other IMC Components.
In this example, select Open deployment monitoring agent.
12. Click Finish.
Deploying IMC NTA
1. In the Installation Completed window (see Figure 26 ), select Open deployment monitoring agent
and click Finish.
The system automatically starts the Intelligent Deployment Monitoring Agent and displays the
Batch deploy window, as shown in
Figure 27 .
Figure 26 Batch deploy
2. Select the components you want to deploy. In this example, select all the NTA subcomponents.
3. Click OK to start deploying the components.
After the deployment is complete, the Batch deploy succeeded window appears, as shown
in Figure 28 .