H3C Technologies H3C SecBlade IPS Cards - Manual (Page 20)

5-1
5
Basic System Configuration
Basic System Configuration
When performing basic system configuration, go to these sections for information you are interested in:
z
Entering/Exiting System View
z
Configuring the Device Name
z
Setting the System Clock
z
Setting the User Connection Timeout Time
z
Specifying the Login Password
z
Displaying Basic System Configuration
Entering/Exiting System View
After logging in to the device, you are in user view and the prompt is <Device name>. Follow these steps
to enter/exit system view:
To do… Use the command… Remarks
Enter system view system-view —
Return to user view from system
view
quit —
With the quit command, you can return to the upper level view. To return to user view from any view
other than user view directly, you can execute the return command or press Ctrl+Z.
Configuring the Device Name
The device name of a device is used as the prompt or part of the prompt of the command line interface
(CLI). For example, if the device name is Sysname, the prompt of the user view is .
Follow these steps to configure the device name:
To do… Use the command… Remarks
Enter system view system-view —
Configure the device name sysname sysname
Optional
The default device name depends
on the device model.