H3C Technologies H3C SecPath F1000-E - Manual (Page 64)

57
Figure 53 Configuring an internal WINS server
d. In the Internal Server area, click Add.
e. Configure an interval WINS server, which is similar to the configuration shown in Figure 53 :
Select GigabitEthernet0/1.
Select 17(UDP) as the protocol type,
Enter 5.5.5.10 as the external IP address.
Enter 138 as the global port.
Enter 192.168.1.2 as the internal IP address.
Enter 138 as the internal port.
f. Click Apply.
g. In the Internal Server area, click Add.
h. Configure an interval WINS server, which is similar to the configuration shown in Figure 53 :
Select GigabitEthernet0/1.
Select 6(TCP) as the protocol type.
Enter 5.5.5.10 as the external IP address.
Enter 139 as the global port.
Enter 192.168.1.2 as the internal IP address.
Enter 139 as the internal port.
i. Click Apply.