H3C Technologies H3C SecPath F1000-E - Manual (Page 56)

49
Figure 37 Adding ACL 2001
# Configure an ACL rule.
a. Click the icon for ACL 2001 and then click Add.
b. Select Permit as the operation, as shown in Figure 38 :
c. Click Apply.
Figure 38 Adding an ACL rule
3. Configure dynamic NAT and the internal server:
# Configure the address pool:
a. Select Firewall > NAT Policy > Dynamic NAT from the navigation tree and then click Add in the
Address Pool area.
b. Add a NAT address pool as shown in Figure 39 :
Enter 1 in the Index field.
Enter 5.5.5.9 as the start IP address.
Enter 5.5.5.11 as the end IP address.
c. Click Apply.