H3C Technologies H3C SecPath F1000-E - Manual (Page 26)

19
Configuration procedure
# Configure the FTP server.
• Select Firewall > NAT Policy > Internal Server from the navigation tree, click Add in the Internal
Server field, and then perform the following operations, as shown in
Figure 22 .
Figure 22 Configuring an internal FTP server
• Select GigabitEthernet0/1 for Interface.
• Select 6(TCP) for Protocol Type.
• Select the option next to Assign IP Address, and then enter 202.38.1.1 in Global IP.
• Select the upper option next to Global Port and enter 21.
• Enter 10.110.10.3 in Internal IP.
• Enter 21 in Internal Port.
• Click Apply.
# Configure the Web server 1.
• Click Add in the Internal Server field and perform the following operations, as shown in Figure 23 .