H3C Technologies H3C SecPath F1000-E - Manual (Page 24)

17
Figure 18 Configuring ACL 2001 to prohibit other users to access the Internet
• Select Deny for Operation.
• Click Apply.
# Configure a NAT address pool.
• Select Firewall > NAT Policy > Dynamic NAT from the navigation tree, click Add, and then perform
the following operations, as shown in
Figure 19 .
Figure 19 Configuring NAT address pool 0
• Enter 0 in Index.
• Enter 202.38.1.2 in Start IP Address.
• Enter 202.38.1.3 in End IP Address.
• Click Apply.
# Configure dynamic NAT.
• Click Add in the Dynamic NAT field and perform the following operations, as shown in Figure 20 .