N in, Figure 23 – H3C Technologies H3C SecPath F1000-E User Manual
Page 27
20
Figure 23 Configuring internal Web server 1
•
Select GigabitEthernet0/1 for Interface.
•
Select 6(TCP) for Protocol Type.
•
Select the option next to Assign IP Address, and then enter 202.38.1.1 for Global IP.
•
Select the upper option next to Global Port and enter 80.
•
Enter 10.110.10.1 in Internal IP.
•
Enter 80 in Internal Port.
•
Click Apply.
# Configure Web server 2.
•
Click Add in the Internal Server field and perform the following operations, as shown in
.
This manual is related to the following products: