Nat-pt configuration examples, Configuring dynamic mapping on the ipv6 side, Network requirements – H3C Technologies H3C SecPath F1000-E User Manual

Page 48: Configuring secpath b (nat-pt device), Configuring secpath a on the ipv4 side, Configuring secpath c on the ipv6 side

Text mode
Original mode

Nat-pt configuration examples, Configuring dynamic mapping on the ipv6 side, Network requirements | Configuring secpath b (nat-pt device), Configuring secpath a on the ipv4 side, Configuring secpath c on the ipv6 side | H3C Technologies H3C SecPath F1000-E User Manual | Page 48 / 68

This manual is related to the following products:

H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI