H3C Technologies H3C WA2600 Series WLAN Access Points - Manual (Page 15)

10
Figure 5 Adjust the tilt of the AP
1
2
3
4
(1) Mounting plate (2) Bolt
(3) Mounting slot (allows bracket rotation) (4) V-shaped bracket
Pole mounting is suitable for rooftop installation.
To install the AP on a pole:
1. Vertically fix the pedestal of the pole to the rooftop or a cement pier on the rooftop with expansion
screws. See
Figure 6 .
Figure 6 Pole and pedestal
2. Fix the V-shaped bracket onto the mounting plate with the bolt.
3. Attach another V-shaped bracket to the pole, making sure that the two V-shaped bracket are level.
Insert two long bolts through the screw holes on the two brackets and attach the bolts, nuts, and flat
and spring washers. See Figure 7 .