H3C Technologies H3C WA2600 Series WLAN Access Points - Manual (Page 14)

9
Installing the AP
The WA2620X-AGNP AP can be mounted on a pole. To ensure the radio coverage, have the AP
installed by professionals.
Installing the AP
CAUTION:
To install the AP and antennas on the same pole, the outer diameter of the pole must be between 60 mm
and 70 mm (2.36 in and 2.76 in).
The AP can be fixed to a pole whose outer diameter is between 60 mm and 110 mm (2.36 in and 4.33
in). The mounting kit includes a pair of V-shaped brackets, a mounting plate, bolts, and nuts. See Figure
4 .
Figure 4 Mounting plate and V-shaped bracket
(1) Mounting plate (2) Mounting slot (allows bracket rotation)
(3) Bolt (4) V-shaped bracket
You can adjust the tilt of the AP by rotating the mounting plate around the bolt to help installation. See
Figure 5 .