beautypg.com

Installing/removing esm/vcpm card – H3C Technologies H3C MSR 20-2X[40] User Manual

Page 72

background image

65

Figure 51 Remove memory bar from the slot

Installing/Removing ESM/VCPM Card

Follow the steps below to install the ESM/VCPM card:

Step1

Make sure all power interfaces are shut down, and then proceed.

Step2

Open the chassis cover (refer to

Opening/Closing Chassis Cover

for details) to find the card.

Step3

Install the card bracket on specified position on the main board, and fasten it on the board.

Step4

Align the card interface with the slot and press down vertically to install the card on the board. Then,

align the screw eye with the card bracket.

Step5

Fasten the card on the bracket with dedicated screws, making sure the card is level and firm.

Step6

Install the cover and power it on.

Figure 52 Install card bracket

See also other documents in the category H3C Technologies Routers: