H3C Technologies H3C MSR 20-2X[40] - Manual (Page 54)

47
Parameter Description
Gateway IP Address
Configure the gateway IP address if the server and the client are not
on the same network segment.
FTP User Name This option is not available for TFTP.
FTP User Password This option is not available for TFTP.
NOTE:
•
Upon upgrade failure, the system prompts “Loading failed”. In this case, please reboot the router to
validate the reset IP address.
• Only FE0 can be used for upgrading an application program through an Ethernet interface in the MSR
20 routers and GE0 can be used in the MSR 30 and MSR 50 routers.
Upgrading Procedure
Trivial File Transfer Protocol (TFTP), a protocol in the TCP/IP protocol suite, is used to transfer trivial files
between clients and the server. It provides not-so-complex and low-cost file transfer services. TFTP
provides unreliable data transfer services over UDP and does not provide any access authorization and
authentication mechanism. It employs timeout and retransmission to guarantee the successful delivery of
data. The TFTP software is much smaller than the FTP software in size:
File Transfer Protocol (FTP) is an application-layer protocol in the TCP/IP protocol suite. It mainly transfers
files among remote hosts. Over TCP, FTP provides reliable and connection-oriented data transfer service
but does not provide access authorization and authentication mechanism.
Step1 Set up an upgrade environment.
Figure 32 Set up a TFTP/FTP upgrade environment
Connect Ethernet 0/0 to a PC with a crossover cable. Start the TFTP/FTP program on the PC, and set the
path of TFTP/FTP server to directory of the application program. You need to set username and password
if FTP server is used.