beautypg.com

H3C Technologies H3C MSR 20-2X[40] User Manual

Page 34

background image

27

Figure 22 Setting the connection port in the local configuration

Step2

Set terminal parameters. As shown in the following figure, in the properties dialog box of the serial

interface, set the baud rate to 9600, data bit to 8, no parity check, stop bit to 1, and flow control to none.
Then, click OK to return to the HyperTerminal window.

Figure 23 Setting serial interface parameters

Step3

Set HyperTerminal properties. Select File > Properties > Settings in the HyperTerminal to enter the

properties setting window as shown in the following figure. Select the terminal emulation type to be
VT100 or auto detect, and click OK to return to the HyperTerminal window.