H3C Technologies H3C S6800 Series Switches User Manual

Page 36

[SwitchC-vsi-vpna-vxlan10] group 225.1.1.1 source 13.1.1.3

[SwitchC-vsi-vpna-vxlan10] quit

[SwitchC-vsi-vpna] quit

# On FortyGigE 1/0/1, create Ethernet service instance 1000 to match frames from VLAN 2.

[SwitchC] interface fortygige 1/0/1

[SwitchC-FortyGigE1/0/1] service-instance 1000

[SwitchC-FortyGigE1/0/1-srv1000] encapsulation s-vid 2

# Map Ethernet service instance 1000 to the VSI vpna.

[SwitchC-FortyGigE1/0/1-srv1000] xconnect vsi vpna

[SwitchC-FortyGigE1/0/1-srv1000] quit

[SwitchC-FortyGigE1/0/1] quit

Configure Switch D:
# Enable IP multicast routing.

system-view

[SwitchD] multicast routing

[SwitchD-mrib] quit

# Enable IGMP on VLAN-interface 11.

[SwitchD] interface vlan-interface 11

[SwitchD-Vlan-interface11] igmp enable

[SwitchD-Vlan-interface11] quit

# Enable PIM-SM on VLAN-interface 21.

[SwitchD] interface vlan-interface 21

[SwitchD-Vlan-interface21] pim sm

[SwitchD-Vlan-interface21] quit

# Enable BIDIR-PIM.

[SwitchD] pim

[SwitchD-pim] bidir-pim enable

[SwitchD-pim] quit

Configure Switch E:
# Enable IP multicast routing.

system-view

[SwitchE] multicast routing

[SwitchE-mrib] quit

# Enable IGMP on VLAN-interface 13.

[SwitchE] interface vlan-interface 13

[SwitchE-Vlan-interface13] igmp enable

[SwitchE-Vlan-interface13] quit

# Enable PIM-SM on VLAN-interface 23.

[SwitchE] interface vlan-interface 23

[SwitchE-Vlan-interface23] pim sm

[SwitchE-Vlan-interface23] quit

# Enable BIDIR-PIM.

[SwitchE] pim

[SwitchE-pim] bidir-pim enable

[SwitchE-pim] quit

Configure Switch F: