Displaying and maintaining vxlans – H3C Technologies H3C S6800 Series Switches User Manual
Page 27
19
Step Command Remarks
2.
Enter interface view.
•
Enter Layer 2 Ethernet interface
view:
interface interface-type
interface-number
•
Enter Layer 2 aggregate interface
view:
interface bridge-aggregation
interface-number
N/A
3.
Enter Ethernet service
instance view.
service-instance instance-id N/A
4.
Enable packet statistics for
the Ethernet service
instance.
statistics enable
By default, packet statistics is
disabled for all Ethernet service
instances.
5.
Return to user view.
return
N/A
6.
(Optional.) Clear packet
statistics on the Ethernet
service instance.
reset l2vpn statistics ac interface
interface-type interface-number
service-instance instance-id
N/A
Displaying and maintaining VXLANs
Execute display commands in any view and reset commands in user view.
Task Command
Display the ARP flood suppression table.
display arp suppression vsi [ name vsi-name ] [ slot slot-number ]
[ count ]
Display MAC address entries for VSIs.
display l2vpn mac-address [ vsi vsi-name ] [ dynamic ] [ count ]
Display information about Ethernet
service instances.
display l2vpn service-instance [ interface interface-type
interface-number [ service-instance instance-id ] ] [ verbose ]
Display information about VSIs.
display l2vpn vsi [ name vsi-name ] [ verbose ]
Display information about the multicast
groups that contain IGMP host-enabled
interfaces.
display igmp host group [ group-address | interface interface-type
interface-number ] [ verbose ]
Display information about tunnel
interfaces.
display interface [ tunnel [ number ] ] [ brief [ description | down ] ]
Display VXLAN tunnel information for
VXLANs.
display vxlan tunnel [ vxlan vxlan-id ]
Clear ARP flood suppression entries on
VSIs.
reset arp suppression vsi [ name vsi-name ]
Clear dynamic address entries on VSIs. reset l2vpn mac-address [ vsi vsi-name ]
Clear packet statistics on an Ethernet
service instance.
reset l2vpn statistics ac interface interface-type interface-number
service-instance instance-id
For more information about the display interface tunnel command, see tunneling commands in Layer
3—IP Services Command Reference.