H3C Technologies H3C S6800 Series Switches - Manual (Page 36)

29
Verifying the configuration
Suppose that the nicknames of RB 1 through RB 6 are 0x5801 through 0x5806. The system IDs of RB 1
and RB 2 are 0000.0000.0001 and 0000.0000.0002.
# Display brief information about all entries in the TRILL unicast routing table on an access layer device
(for example, RB 3).
[RB3] display trill unicast-route
Destination Interface NextHop
-----------------------------------------------
0x5801 FGE1/0/2 Direct
0x5802 FGE1/0/3 Direct
0x5803 N/A N/A
0x5804 FGE1/0/2 0x5801
FGE1/0/3 0x5802
0x5805 FGE1/0/2 0x5801
FGE1/0/3 0x5802
0x5806 FGE1/0/2 0x5801
FGE1/0/3 0x5802
# Display all entries in the TRILL multicast routing table.
[RB3] display trill multicast-route
Root Flag
-------------------------------------
0x5801 Valid
0x5802 Valid
# Display multicast routing information for the TRILL distribution tree rooted at RB 1.
[RB3] display trill multicast-route tree-root 5801
Root: 0x5801
LocalRcvFlag: True
List of VLANs:
1
List of outgoing ports:
FGE1/0/2
# Display brief information about all IPv4 TRILL VRs.
[RB1] display trill vr
VRID Partner RB State Local
----------------------------------------------
1 0000.0000.0001 Backup Y
0000.0000.0002 Master N
# Display all entries in the TRILL VR multiport unicast MAC address table.
[RB3] display trill vr-route
VRID MAC address VLAN Port
---------------------------------------
1 0cda-41ed-be01 10 FGE1/0/2
FGE1/0/3
1 0cda-41ed-be01 20 FGE1/0/2
FGE1/0/3