H3C Technologies H3C S6800 Series Switches - Manual (Page 29)

22
To enable logging of TRILL neighbor changes:
Step Command Remarks
4. Enter system view. system-view N/A
5. Enter TRILL view. trill N/A
6. Enable logging of TRILL
neighbor changes.
log-peer-change enable
By default, logging of TRILL neighbor changes
is enabled.
Configuring SNMP for TRILL
To report critical TRILL events to an NMS, enable SNMP notifications for TRILL. For TRILL event notifications
to be sent correctly, you must also configure SNMP as described in Network Management and
Monitoring Configuration Guide.
TRILL shares the standard IS-IS MIB with IS-IS. The standard IS-IS MIB provides only single-instance MIB
objects. For SNMP to correctly identify TRILL's management information in the standard IS-IS MIB, you
must configure a unique context for TRILL.
Context is a method introduced to SNMPv3 for multiple-instance management. For SNMPv1/v2c, you
must specify a community name as a context name for protocol identification.
To configure SNMP for TRILL:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enable SNMP
notifications for TRILL.
snmp-agent trap enable trill
[ adjacency-state-change | area-mismatch |
buffsize-mismatch | id-length-mismatch |
lsdboverload-state-change | lsp-parse-error |
lsp-size-exceeded | max-seq-exceeded |
maxarea-mismatch | new-drb | own-lsp-purge
| protocol-support | rejected-adjacency |
skip-sequence-number | topology-change |
version-skew ] *
By default, SNMP
notifications are enabled for
TRILL.
3. Enter TRILL view. trill N/A
4. Configure the context
name for TRILL.
snmp context-name context-name
By default, no context name
is configured for TRILL.
Enabling TRILL to forward traffic from EVB
S-channels
Perform this task on the interface that is directly connected to a server. TRILL will forward the packets
received from the EVB S-channels on the interface to the TRILL network.
Before you perform this task, you must enable EVB on the interface.
To enable TRILL to forward traffic from EVB S-channels: