H3C Technologies H3C S12500 Series Switches User Manual
Page 91
81
To verify transceiver modules:
Task Command
Display key parameters of the transceiver in a
specified interface
display transceiver interface [ interface-type
interface-number ]
Display part of the electrical label information of
transceiver in a specified interface
display transceiver manuinfo interface [ interface-type
interface-number ]
# Display the main parameters of the transceiver plugged in interface GigabitEthernet 3/0/19.
GigabitEthernet3/0/19 transceiver information:
Transceiver Type : 1000_BASE_SX_SFP
Connector Type : LC
Wavelength(nm) : 850
Transfer Distance(m) : 550(50um),270(62.5um)
Digital Diagnostic Monitoring : YES
Vendor Name : H3C
Ordering Name : SFP-GE-SX-MM850
Table 22 Command output
Field Description
transceiver information
Transceiver information
Transceiver Type
Transceiver type
Connector Type
Type of the connectors of the transceiver:
•
SC—Fiber connector, developed by NTT
•
LC—1.25 mm/RJ-45 optical connector developed by Lucent.
•
RJ-45
•
CX 4
Wavelength(nm)
•
Fiber transceiver—Central wavelength (in nm) of the laser sent. If the
transceiver module supports multiple wavelengths, every two wavelength
values are separated by a comma.
•
Copper cable—Displayed as N/A.
Transfer distance(xx)
Transfer distance, where "xx" represents the distance unit: km (kilometers) for
single-mode transceivers and m (meters) for other transceivers.
If the transceiver supports multiple transfer medium, every two values of the
transfer distance are separated by a comma. The transfer medium is included in
the bracket following the transfer distance value. The following are the transfer
media:
•
9 um—9/125 μm single-mode optical fiber
•
50 um—50/125 μm multi-mode optical fiber
•
62.5 um—62.5/125 μm multi-mode optical fiber
•
TP—Twisted pair
•
CX4—CX4 cable
Digital Diagnostic
Monitoring
Support for the digital diagnosis function:
•
YES—Supported
•
NO—Not supported