Eneo VCQ-6057 - Manual (Page 35)

35
Anhang / Annex / Annexe / Anexo
BYTE 1: Status code for normal operation modes
b7 b6 b5 b4 b3 b b b0
LOCK VCR SEQU QUAD CH4 CH3 CH CH
b7 b6 b5 b4 b3 b b b0
CH4 CH3 CH CH CH4 CH3 CH CH
Channel Select
0 = CH
0 = CH
0 = CH3
0 = CH4
Display Mode
0 = Quad screen display
= Full screen display
Auto-sequencing mode
0 = Auto sequencing mode
= Quad or full screen mode
VCR mode
0 = VCR operation
= Live operation
Security Lock mode
0 = Security lock ON mode
= Security lock OFF mode
Menu Setup mode
00 = Menu setup mode
BYTE 2: Status code for alarm operations: The first 4 bits show the sensor activated alarm status of each channel; next 4 bits show the video loss alarm
status of each channel. The digit „” means alarm event is detected, and „0” means no alarm event is detected,
b7 - b4: Sensor Activated Alarm b3 - b0: Video Loss Alarm
Sensor activated Alarm
000 = CH activated
000 = CH activated
000 = CH3 activated
000 = CH4 activated Video Loss Alarm
000 = CH activated
000 = CH activated
000 = CH3 activated
000 = CH4 activated