Phone functions – ATL Telecom IP250 User Manual
Page 4
4
37
7 CONFIGURATION
29
7.1 Backup
29
7.2 Restore
30
8 RESET
31
PHONE FUNCTIONS
32
MESSAGE
32
ENTER
32
DELETE
32
STORE
32
FORWARD
32
SET
32
CLID
32
MUTE
33
HOLD
33
CONF
33
AUTO RD
33
REDIAL/OUT
33
SPEAKER/HEADSET
33
VOLUME UP AND DOWN
33
TRANSFER
33
OPERATION
33
CALLER ID
35
PHONE BOOK
35
PHONE SETTING
37
SAFETY INSTRUCTIONS
39
GUARANTEE
39
MANUFACTURER’S DECLARATION
40
Volume adjustment
a. On handset, press volume up and down button to adjust handset volume
b. Speakerphone mode, press volume up and down button to adjust speakerphone
volume
c. Headset mode, press volume up and down button to adjust headset volume
Hold
Mute and resume conversation
When MUTE key is pressed, the transmitter microphone on the handset, speakerphone, and
headset will be muted. All microphones will remain muted until the MUTE button is pressed
again.
Message storage and retrieval
PHONE SETTING
Date Format
On-hook, press SET to enter submenus, select Phone Set Up and press ENTER, select Date
and Time and press ENTER, select Date Format to access date format selection page, select
desired date format and press STORE to confirm
a. DD-MM
b. MM-DD
c. DD-MM-YY
d. MM-DD-YY
Time Format
On-hook, press SET to enter submenus, select Phone Set Up and press ENTER, select Date
and Time and press ENTER, select Time Format to access date format selection page, select
desired time format and press STORE to confirm
a. 12HR
b. 24HR
Ringer Tone
On-hook, press SET to enter submenus, select Phone Set Up and press ENTER, select
Ringer and press ENTER, select Ringer Tone to access Ringer Tone selection page, select
from 1 to 8 by pressing number key and then press STORE to confirm
Ringer Volume
On-hook, press SET to enter submenus, select Phone Set Up and press ENTER, select
Ringer and press ENTER, select Ringer Volume to access Ringer Volume adjustment page,
adjust the volume by using volume adjusting keys and then press STORE to confirm.
Handset Volume
On-hook, press SET to enter submenus, select Phone Set Up and press ENTER, select