ATL Telecom IP250 - Manual (Page 16)

16 25
3.7 Tone
The following page is used to configure Tones which applies in order to acknowledge users.
Dial Tone: The tone you hear when you pick up handset
Recall Dial Tone: The tone when you hold callee and prepare to make another call.
Confirm Tone: The tone after you’ve set up some service, like DND (Do Not Disturb),
Call Forwarding, etc.
Ring Back Tone: The audible ringing you hear before callee picks up and answers
your call.
Busy Tone: The tone indicates the number you dialed is in busy now.
Reorder Tone: The tone you hear if you dial an invalid number or the call is not
available.
Receiver-Off-Hook Tone: The tone to alert you to place the handset on-hook.
Message-Waiting-Indicator Tone: The tone to notify you to call for message box.
Call-Waiting-Indicator Tone: The tone to make you aware of the second incoming
call while you’re in conversations. ►
►
►
►
►
►
►
►
►
5.5 Port Number
This allows the device to use different port number for the http server. The default port number
is 80.
5.6 Ringer Tone
The following page allows users to select desired ring tone from the drop down list, click
Save Ring Tone Setting once selected.