ATL Telecom IP250 - Manual (Page 27)

14 27
3.4 User 1
The following page allows the user to configure the phone to connect to an IPPBX or a SIP
service. Enter the phone number, caller ID, username and password specified by the your
ITSP or the administrator of your IPPBX.
6 DOWNLOAD
The following page provides two options for downloading a new firmware application image to
the device. If you wish to download the new firmware image using TFTP, enter the filename of
the ROM image and enter the IP address of the TFTP server on which this file resides.
To initiate the TFTP download process, press “Start TFTP Download.” If the ROM image is
stored on the same local machine you are using to access the device’s web pages, you can
choose to download the ROM file to the device using an HTTP post. Enter the filename of the
ROM image or press “Browse” to help locate the file.
To initiate the HTTP download process, press “Start HTTP Download.”
If the main application is executing at the time, the device will automatically reboot itself
into the downloader mode and begin the download process. If the downloader application is
executing at the time, the download process will begin. The download status will be displayed
when the image download process is complete. Please refer to Section A “The Downloader
Application” for more details on the download process.
6.1 HTTP Download method
When using http to upgrade firmware, it will check firmware version before starting download
process.
In Filename field, press Browsing Button.
Press Start HTTP Download button to start downloading file.
If firmware version doesn’t fit in with old version, it won’t allow updating.