ATL Telecom IP250 - Manual (Page 19)

22 19
5.2 Timeout
This field will only be active if the admin password is set.To change the Authenication time out
open the System menu from the top headings. This will bring up the system sub menus on the
left hand side of the page. Select Timout from the menu. In HTTP Authentication Timeout field,
input the timeout value you wish to use, then press the Change Time button. The phone’s
browser authenication will now timeout according to the time you have set in this field. Once
the timout expires the user will be prompted to log into the phone again before being allowed
to change anymore settings.
3.10 Phonebook
This page allows you to setup 10 numbers you wish to store on your phone. To add an entry
into your phone book fill out the number section with the phone number of the person you wish
to add. Once the number has been entered then you will need to enter the sip domain that
the phone number is registered to in the IP Address field along with a port number in the Port
field. The default port number for sip is 5060. When you have finished filling out the contact
details you will need to click the Save SIP Phone Book Settings button at the bottom of the
page to save your new entries.