ARM Electronics RT8-16CD - Manual (Page 80)

LICENSED SOFTWARE AP
-75-
8) DATE
Choose the current date from “DATE” drop-down menu and enter the current time.
When you click the drop-down menu, a calendar shown for you to set the current date.
9) FORMAT
Choose the format for date display from the three options: Y-M-D, D-M-Y and M-D-Y.
10) DAYLIGHT SAVING
Specify whether to use daylight saving time (ON / OFF) and time period (START / END), and adjust the daylight saving
time in hour (ADJUST).
Press “APPLY” to confirm the setup, or “EXIT” to quit without saving.
(7) Record Setting
In “DVR”  “Record Setting”, you can set DVR record settings.
Note: The same settings can also be made in the DVR. Please refer to the section “6.1 Record” at page 27
for details.
11) MANUAL RECORD
Specify whether to use manual recording (YES / ON), and set IPS number from the drop-down menu.
12) EVENT RECORD
Specify whether to user event recording (YES / ON), and set IPS number from the drop-down menu.
13) TIMER RECORD
Specify whether to user timer recording (YES / ON), and set IPS number from the drop-down menu.
14) OVERWRITE
Specify whether to overwrite the HDD capacity when the HDD is full (YES / NO).
15) RECORD IMG SIZE
Choose “FRAME” or “CIF”. This selection will affect the available IPS options in the 3 recording modes described
above.
Create PDF files without this message by purchasing novaPDF printer ( http://www.novapdf.com )