ARM Electronics RT8-16CD User Manual
Page 41
MENU FUNCTION
-36-
8) ALARM
Select LOW / HIGH for the alarm polarity. The default alarm value is OFF.
9) PREV / NEXT (Only for 16CH model)
Select “PREV” to go to the previous page, or “NEXT” to go to the next page.
(2) Detection Timer
Move the cursor to “DETECTION TIMER”, and press ”ENTER”. You will see a similar screen as the following:
DETECTION
DETECTION TIMER
DETECTION SETUP
DATE
START
END
DETECTION TIMER
OFF
00 : 00
-
00 : 00
DAILY
08 : 00
-
18 : 00
SUN
06 : 00
-
23 : 00
MON-FRI
18 : 00
-
23 : 00
OFF
00 : 00
-
00 : 00
OFF
00 : 00
-
00 : 00
OFF
00 : 00
-
00 : 00
Set the date, start time and end time for the detection function. The setting method is similar to “TIMER”. Please refer to
the section “6.2 Timer” at page 31.
6.4.3 Display
In this menu list, you can check and change some display settings.
Move the cursor to “DISPLAY”, and press ”ENTER”. You will see a similar screen as the following:
ADVANCE
DISPLAY
CAMERA
TITLE DISPLAY
ON
DETECTION
DATE DISPLAY
ON
DISPLAY
HDD INFO
ON
ALERT
LOSS SCREEN
BLUE
REMOTE
PLAYBACK INFO
NORMAL
SYSTEM
DWELL DURATION (SEC)
2
NETWORK
DE-INTERLACE
ON
BACKUP
MONITOR OUT
MAIN
HDD INFO
OSD
SETUP
EVENT LOG
WATERMARK
ON
The submenu items are described below:
1) TITLE DISPLAY
Select to display the channel title or not (ON / OFF).
2) DATE DISPLAY
Select to display the date or not (ON / OFF).
3) HDD INFO
Select to display HDD remaining capacity or not (ON / OFF).
4) LOSS SCREEN
Set the color for the video loss screen (BLUE / BLACK).
files without this message by purchasing novaPDF printer (