Menu function 6.1 record – ARM Electronics RT8-16CD User Manual
Page 32
MENU FUNCTION
-27-
6. MENU FUNCTION
6.1 Record
In this menu list, you can set record settings. Press “MENU” button on the front panel to enter the main menu list. The
default admin password is 0000. Enter the default password, and press “ENTER”. Users can change the password later.
Please refer to the section “6.4.6 System” at page 41.
Move the cursor to “RECORD”, and press ” ENTER”. The screen will show the following options:
RECORD
MANUAL RECORD ENABLE
MENU
EVENT RECORD ENABLE
RECORD
TIMER RECORD ENABLE
TIMER
OVERWRITE
DATE
RECORD IMG SIZE
ADVANCE
RECORD QUALITY
MANUAL RECORD IPS
EVENT RECORD IPS
TIMER RECORD IPS
TOTAL IPS SHARE
You can use the following buttons for menu setting:
BUTTON
FUNCTION
UP, DOWN, LEFT, RIGHT
Move the cursor.
＋ , －
Choose numbers / selections.
ENTER
Go to the submenu / confirm the selection.
MENU
Go to the menu list / confirm the change / exit the menu list.
The submenu items are described below:
1) MANUAL RECORD ENABLE
Start / stop the manual recording function.
2) EVENT RECORD ENABLE
Start / stop the event recording function. When this function is enabled, the recording will be triggered by any motion or
external alarm.
3) TIMER RECORD ENABLE
Start / stop the timer recording function.
4) OVERWRITE
Select to overwrite previous recorded data in your HDD. When the HDD is full under O/W recording mode, this device
will clear 8GB data from the oldest for continuous recording without notice.
5) RECORD IMG SIZE
Select one of the image sizes: FRAME or CIF.
Note: When changing the record image size, please stop recording first.
6) RECORD QUALITY
files without this message by purchasing novaPDF printer (