ARM Electronics RT8-16CD User Manual
Page 39
MENU FUNCTION
-34-
The submenu items are described below:
1) TITLE
You can change the default camera naming here. The default title is the channel number.
Move the cursor to the camera title you want to change, and press “ENTER” to access the character selection screen.
Assign a new name to the camera up to six characters (letters or symbols).
2) BRIG/CONT/SATU/HUE
You can adjust the brightness/contrast/saturation/hue of each channel here. The default value of BRIG is 110, and
others are 128. The value is adjustable from 0 to 255.
3) COV
Select if you want to mask the selected channel under recording (YES/NO). When this function is activated, the
wording “COV” will be shown on the screen.
4) REC
Select if you want to enable recording for the selected channel (YES/NO). When this function is activated, the symbol
“
” will be shown on the channel screen.
5) PREV/NEXT (Only for 16CH model)
Select “PREV” to go to the previous page, or “NEXT” to go to the next page.
6.4.2 Detection
In this submenu, you can set up detection-related functions: DETECTION SETUP and DETECTION TIMER.
Move the cursor to “DETECTION”, and press ”ENTER”. The screen will show the following options.
ADVANCE
DETECTION
CAMERA
DETECTION SETUP
DETECTION
DETECTION TIMER
DISPLAY
ALERT
REMOTE
SYSTEM
NETWORK
BACKUP
HDD INFO
EVENT LOG
(1) Detection Setup
Move the cursor to “DETECTION SETUP”, and press ”ENTER”. You will see a similar screen as the following:
DETECTION
DETECTION
DETECTION SETUP
TITLE
DET
AREA
LS
SS
TS
RE
ALARM
DETECTION TIMER
01
ON
SETUP
07
03
02
10
LOW
02
OFF
SETUP
07
03
02
10
OFF
03
OFF
SETUP
07
03
02
10
LOW
04
OFF
SETUP
07
03
02
10
HIGH
05
OFF
SETUP
07
03
02
10
OFF
06
OFF
SETUP
07
03
02
10
LOW
07
OFF
SETUP
07
03
02
10
OFF
08
OFF
SETUP
07
03
02
10
LOW
PREV NEXT
files without this message by purchasing novaPDF printer (