ARM Electronics DVRCD120 - Manual (Page 36)

User’s Manual
35
4.4.1.3 Digital Signature
User can export video clip with or without a digital signature. Set the item to
to export with the signature file, or exports without the signature
file.
Each recorded video with digital signature will be exported into four files,
including *.gpg, *.avi, *.sig and readme txt. The *.gpg file name is as the last
eight MAC (Media Access Control) address of the unit.
Make sure that you have an external storage device, such as a USB Hard
Drive or USB ThumbDrive
®
, available and connected to the appropriate port
for export.
For more information on verifying digital signature, see Appendix D: Verifying
Digital Signature.
4.4.1.4 Erase Disc
This function is used to remove data found on a CD-RW or DVD+RW disk
prior to export new information to the drive. Select and press ENTER
to start deleting data.
4.4.2 Quick Video Export through Front Panel
The unit allows you to export wanted video to the built-in CD-RW or an
external device, such as a USB ThumbDrive ® , and save the video to *.drv file.
If you want to export video to an external device, make sure the external
storage has been connected to the DVR unit and the port has been set
appropriately for video export.
NOTE: Once an external device has been connected to the DVR unit,
the device has priority over the built-in CD-RW; which means that the
wanted video will be exported to the external device instead of the
built-in CD-RW.
According to the size of video, the export may take you about 10 minutes to 1
hour.