ARM Electronics DVRCD120 - Manual (Page 26)

User’s Manual
25
3.6.5 To Record Event Video Only
If you want your DVR unit to start recording only under the alarm is triggered,
follow the steps:
• Enter the OSD setup menu with correct password.
• In the OSD setup menu, select menu. Move the cursor to
the item , and select .
Refer to OSD Menu Setup Guide, Section Preset Record Configuration for
more detailed information.
4. Basic Operation
The Full-featured MPEG-4 DVR allows user to access some general
operations through the front panel easily. The following sections introduce the
general operations of the unit.
4.1 Viewing Live / Playback Video
The general functions in live and playback mode are described in the
following sections.
4.1.1 Viewing Modes
The Full-featured MPEG-4 DVR supplies user versatile ways of viewing both
live and recorded video. Following presents these view formats.
Viewing in Full Screen
Press any CHANNEL key directly to view the corresponding camera image in
full view format.
Viewing in Multi-window
Various multi-window view formats are offered for selecting. To switch
between available viewing formats, press MODE repeatedly.
The available view formats are illustrated as the following figure.