ARM Electronics DVRCD120 - Manual (Page 18)

User’s Manual
17
PLAY/STOP
Press this key to switch between live image and playback video.
NOTE: The video of latest 5 ~ 10 minutes cannot be played back,
because the video is still saved in the buffer.
MODE
Press repeatedly to select for wanted main monitor display format. There are
three available view modes: full screen, 4-window (2×2) and 16-window (4×4).
Refer to OSD Menu Setup Guide, Section Viewing Modes for detailed
information.
COPY
• In Playback mode, press COPY to quick export video to external device,
including USB CD-RW and ThumbDrive
®
, etc. Detailed operation refer to
OSD Menu Setup Guide, Section Quick Video Export through Front Panel.
CALL
• In Live mode, press to enter call monitor control mode.
Direction Keys
• In Zoom mode, these keys function as Direction keys.
• In the OSD setup menu, the Direction keys are used to move the cursor to
previous or next fields. To change the value in the selected field, press UP
/ DOWN keys.
ESC
• Press to cancel or exit from certain mode or OSD menu without changing
the settings made previously.
• This key allows you to enable the key lock function.
If the password protection has been enabled, press ESC for two seconds
to lock up the function of certain keys on the front panel, including PLAY,
MENU, SEARCH, CALL and DOME. Once you lock up the function of
these keys, you have to enter the correct password before accessing the
functions of these keys. The unlocking duration will list for 5 minutes, then
these keys will go back to locked mode.
If the password protection has not been enabled, press ESC for two
second to lock/ unlock the functions of these keys.