ARM Electronics DVRCD120 - Manual (Page 29)

User’s Manual
28
Pause Playback and Single Step Forward
To pause and resume recorded video, follow these steps.
• Press one of the CHANNEL keys to display the corresponding camera in
full screen.
• Press PAUSE to pause the current playback image.
• Press RIGHT / LEFT Direction keys to move the video single step reverse /
forward. Press and hold RIGHT / LEFT keys to reverse / forward the video
single step continuously.
• Press PAUSE again to resume the playback operation.
Viewing Live Image in Playback Mode
Press the MODE key repeatedly in playback mode, a 16-window viewing
mode contains both live and playback image appears. This view mode is
illustrated as the following figure.
The eight windows on the top side of the screen playback the Live video from
channel 1 to channel 8 respectively, and the other windows allow user to view
Playback image from channel 1 to channel 8.
4.1.5 Dual Main Output (For T Model Only)
For Full-featured MPEG 4 DVR Turbo Model users, they can use the Call
Monitor as the second Main Monitor, and access lots of functions, such as
setup OSD menu, and viewing in different mode, through the second Main
Monitor. To perform this function, you have to reset a jumper positioned on the
Turbo Module inside the unit.
To use this function, the VGA and BNC connectors, positioned on the rear
panel, have to be connected with monitors, respectively. The VGA monitor is
treated as the Main Monitor, and BNC monitor the second Main Monitor.