Positioning the waist buckle – Aqua Lung WTX Buoyancy System User Manual

Page 34

The metal waist buckle can be mounted of either side for the waistband.

POSITIONING WAIST BUCKLE

If you would like to switch the buckle to the other side,

weave the buckle as shown. Don the WTX harness with

cylinder(s) and your normal exposure suit. Run the 2-inch

waistband through the buckle so that the buckle will be

positioned where you like.

Excess webbing may be cut with scissors and the end burned with a lighter to prevent unraveling.

NOTE:

Do not cut the excess webbing so short that you cannot enlarge it in the future to

compensate for a thicker exposure suit.

Table of Contents