Aqua Lung WTX Buoyancy System User Manual

Page 31

MOUNTING A SINGLE CYLINDER OR TWIN CYLINDERS USING NUTS AND BOLTS

To bolt a single cylinder or twin cylinders to the WTX harness, an Apeks back plate

must be inserted into it. Ideally, the bolts on a single tank attachment kit or on a

set of twin bands should be 11 inches (28 cm) on center. Remove the back pad

from the WTX harness. Insert the bolts through the appropriate grommets on the

bladder, and through the appropriate grommets on the WTX harness. Secure with

flat washer and nut.

Table of Contents