Aqua Lung WTX Buoyancy System - Manual (Page 27)

5. Repeat the process for the lower cylinder band.
Mounting Directly to the WTX Harness
1. Insert the cylinder bands through the right slots in
the buoyancy cell and on through corresponding
web loops in the WTX harness. Make sure that the
GripLock™ patch is facing outward.
2. After exiting the second webbed loop, direct the cylinder
bands out the remaining slot of the buoyancy cell.
4. After exiting slot 4, the last slot in the series, direct the
cylinder band out the remaining slot of the buoyancy
cell.
© 2014 Apeks
Table of Contents