Aqua Lung WTX Buoyancy System - Manual (Page 21)

1. Firmly grasp the metal D-ring with your left hand.
THREADING THE CAM BUCKLE
Mounting Directly to the WTX Harness
1. Insert the cylinder bands through the left slots in the
buoyancy cell and on through corresponding web
loops in the WTX harness. Make sure that the hook
and loop of the cylinder bands are facing outward.
2. After exiting the second webbed loop, direct the cylinder
band out the remaining slot of the buoyancy cell.
3. Slide a gripper pad onto each cylinder band with the
ribbed side facing toward the cylinder
2. While firmly holding the metal D-ring, rotate the buckle
back towards the webbing. The buckle should form an angle
with the metal D-ring as shown in the top view.
TOP VIEW
© 2014 Apeks
Table of Contents