Aqua Lung WTX Buoyancy System - Manual (Page 33)

1. Weave webbing back through sewn-in shoulder strap loop.
2. Install 3-bar plastic slide to webbing so that it’s positioned about an inch below rectangular plastic
loop.
3. Insert webbing, back to front, through rectangular plastic
loop and back around toward 3-bar plastic slide.
4. Weave webbing through 3-bar plastic slide and tighten, making sure that there is at least 0.5 inches
of excess webbing extending past the 3-bar plastic slide.
To securing the shoulder webbing:
CAUTION: Failure to correctly reassemble shoulder strap could cause strap assembly
to come undone during a dive, resulting in loss of equipment.
© 2014 Apeks
Table of Contents