Aqua Lung WTX Buoyancy System - Manual (Page 15)

Multiple Grommets for Nut and Bolt Attachment
TWIN CYLINDER BUOYANCY CELLS
Twin cylinder buoyancy cells have three grommets near the
top of the center panel and a corresponding oval grommet
near the bottom of the center panel. The three grommets
allow the diver a choice of three height adjustment settings
to achieve proper trim of the cell. Rather than have the
lower bolt line up perfectly with a lower hole as other brands
require, the oval grommet accommodates bolts that are
slightly out of position.
Narrow at Top for Full Access to Valves and Regulators
Apeks buoyancy cells are designed to be slim at the top to allow the diver’s head to tilt back, encourage
proper hose placement and to assure that the diver has easy access to the manifold valves.
Lower Left Pull Dump
Each twin cylinder buoyancy cell comes standard with a lower left pull dump. This easy-to-reach dump
is convenient when dumping while in a horizontal or inverted position.
Optional Lower Right Pull Dump
On the lower right is an additional threaded manifold. While it comes capped off from the factory, it gives
the diver the option of adding a second pull dump. A dump valve kit is (p/n 42754).
Outer Bag made of 1000D ArmorShield™ Cordura
The outer bag of the twin cylinder buoyancy cell is made from 1000 denier ArmorShield™ Cordura. This
fade-resistant material was chosen for its extreme durability.
© 2014 Apeks
Table of Contents