Aqua Lung WTX Buoyancy System - Manual (Page 23)

SECURING YOUR BUOYANCY SYSTEM TO THE CYLINDER USING STANDARD CYLINDER BANDS
NOTE: BC cylinder bands adjust for all standard cylinder diameters: 6.9 (17.5 cm), 7.25 (18.5
cm), and 8.0 (20.3 cm).
1. Remove the free end of the cylinder band webbing from
the outer slot on the buckle.
2. Slide the cylinder band over the cylinder so that the BC
is at the desired position in relation to the cylinder valve.
Make sure the cylinder valve air outlet is facing the back
of the BC.
3. While holding the cylinder secure, pull the free end of
the upper cylinder band webbing until there is a very
tight fit between the pack and the cylinder.
© 2014 Apeks
Table of Contents