Aqua Lung WTX Buoyancy System - Manual (Page 28)

THREADING THE GRIPLOCK™ CYLINDER BAND
1. Insert the open end of the cylinder band into the large opening of the bail, around the slide bar and out
the small opening of the bail. Secure the hook and loop on the band to hold the bail in place. Repeat
process for other cylinder band.
ADJUSTING THE GRIPLOCK™ CYLINDER BAND
NOTE: The GripLock™ cylinder band adjusts for all standard cylinder diameters and is ready for
use with an aluminium 80 cf (7.25 inch / 184 mm) cylinder when it leaves the factory.
1. There are three diameter settings for cylinder size A. large cylinder B. AL 80 cf (7.25 in / 184 mm)
C. smaller cylinder. Adjust the macro adjustment for the proper size cylinder. Secure hook and loop
on the band to retain macro preset.
Macro Presets
A B C
WARNING: The BC must be completely deflated of air before adjusting the GripLock cylinder
band. Failure to do so may result in the cylinder slipping during the course of a dive.
© 2014 Apeks
Table of Contents