Edimax Technology Wireless LAN Access Point - Manual (Page 36)

W ireless L AN AP Configuration
Add MAC
address int o the
table
In t he bot tom “New” area, fill in t he
“MAC Address” and “Comment” of the
wireless st ation t o be added and t hen
click “Add”. Then t his wireless st ation
will be added int o t he “MAC Address
Filtering Table” above. If you find any
typo bef ore adding it and want to ret ype
again. Jus t click “Clear” and both “MAC
Address” and “Comment” fiel ds will be
cleared.
Remove MAC
address from t he
table
If you want t o remove some MAC
address from t he “MAC Address
Filtering Table”, selec t t he MAC
address es you want to remove in the
table and t hen click “Delete Sel ected”. If
you want remove all MAC addresses
from t he table, j ust clic k “Delet e All”
butt on.
Reset
Click “Reset” will clear your current
selections.
Click Appl y butt on at the bottom of the screen t o save t he
above configurations. You can now configure other advanc e
sections or st art using t he Access Point.
34