Amped Wireless AP600EX - High Power Wireless-N 600mW Pro Access Point - Manual (Page 50)

AP600EX USER’S GUIDE
49
The range from the Pro Access Point seems low.
a. Check to see that your wireless output settings are at 100%. Go to the Web Menu, Wireless Settings
and check the Advanced Settings. Make sure the output power is at 100%.
b. Your Pro Access Point may be installed in a poor location. Avoid setting up your Pro Access Point in
areas with high interference, such as, near fridges, microwaves, metallic objects and low surfaces.
Install the Pro Access Point in a higher location if possible.
c. Check the connections of the Antennas to the Pro Access Point. Tighten them if necessary.
d. Adjust the direction of the Pro Access Point in different angles. The internal antenna is a high power
directional antenna and will require adjusting to find the optimal orientation.
My Wireless Access Schedule is being erratic and not working at the correct times.
a. You need to adjust your Time Zone Settings from the Management Web Menu page.
WiFi Protected Setup (WPS) is not working. Push button configuration does not detect the connection.
a. The Pro Access Point supports WPS connections however some companies may use proprietary code
for their own push button configurations. Try connecting using the Windows wireless utility or Mac
wireless utility instead.