Amped Wireless AP600EX - High Power Wireless-N 600mW Pro Access Point - Manual (Page 45)

AP600EX USER’S GUIDE
44
TROUBLE SHOOTING
The tips in this guide are listed in order of relevance. Try solution (a) before trying solution (b), etc.
I entered setup.ampedwireless.com and it failed to open the Web Menu.
a. Make sure your computer is connected to the Pro Access Point wirelessly and NOT using a network
cable. Ensure the power is plugged in and on. Try to access the setup menu again.
b. Enter the following web address into your web browser: http://setup.ampedwireless.com
c. Power off (unplug the power adapter) the Pro Access Point and power it back on. Try again.
d. Reset your Pro Access Point to default settings by holding the Reset Button (located on the back
panel) for ten (10) seconds and try again.