Amped Wireless AP600EX - High Power Wireless-N 600mW Pro Access Point - Manual (Page 41)

AP600EX USER’S GUIDE
40
When installing multiple Pro Access Points using PoE follow the guidelines below for proper setup:
1) Pre-Configure your Pro Access Points before setup:
Configure the wireless network names, security settings and channel numbers of each Pro Access
Point before beginning your installation. This will make it easy to identify each wireless network as
they are installed.
2) Proper Network Port Connections:
Attach the PoE cable from the LAN Port of the first Pro Access Point (using a power adapter) to the
PoE Port of the second Pro Access Point (no PoE adapter or power adapter needed).
3) Allow the Pro Access Point to Register with your Network:
Allow 2 minutes for the second Pro Access Point (using only PoE, no PoE Adapter or power adapter) to
configure itself to the network before attaching the next Pro Access Point. (When the wireless
network name of the second Pro Access Point appears in a SSID scan from a computer, it is ready to
attach the next Pro Access Point)
When attaching the third Pro Access Point, like the second Pro Access Point, attach the PoE cable
from the
LAN Port port of the second Pro Access Point to the PoE Port of the third Pro Access Point
and allow 2 minutes for the third Pro Access Point to register with your network. Repeat these steps
as necessary for additional PoE installations.