Amped Wireless AP600EX - High Power Wireless-N 600mW Pro Access Point - Manual (Page 43)

AP600EX USER’S GUIDE
42
DEFAULT SETTINGS
The default settings for your Pro Access Point are listed here. If for some reason you need to return your Pro
Access Point back to default settings, hold down the Reset button on the back panel for 10 seconds. The Pro
Access Point will reset back to factory settings as listed below:
IP Address: 192.168.1.240
DHCP: Auto
Web Menu Access: http://setup.ampedwireless.com
SSID: Amped_Pro_AP
Security Key (WPA/AES): wireless