Amer Networks SRPM24 - Manual (Page 8)

SRPM24
SNMP Trap
1. Cold start
2. Warm start
3. Authorization fail
4. PD disconnect trap-PoE port event
5. DC disconnect trap-PoE port Event
6. Disconnect PD off-PoE port event
7. Over loading trap-PoE port event
8. Short circuit trap-PoE port event
9. Over Temp protection trap –PoE port event
10. Power management –PoE port off event
* Trap station up to 3
Software Upgrade TFTP firmware upgrade
PoE System
Configuration
IEEE802.3af
System status display: power voltage, current, power
consumption
Temperature and power consumption limitation setup
PoE Port
Configuration Port enable/disable
Power limitation rule configuration
PoE Port Status
Port status
Feeding power, current, detected class
Show the cause of port off (AC disconnect off, DC
disconnect off, Disconnect PDU off, Over loading off Short
circuit off, Over Temp. protection off, Power
management — Port off)
DHCP DHCP client
IP Management
Security
Supports 10 IP address accounts for system
management security for Web, SNMP, Telnet
management security to prevent intruder
Redundant Power
Monitor
Input DC voltage, Input DC frequency, Input DC current,
Output DC Voltage, Output DC current, and Buzzer
control
SYSLOG
Supports System log record and remote system log
server
7