Amer Networks SRPM24 - Manual (Page 16)

SRPM24
Login in the Console Interface
When the connection between the device and PC is ready, turn on the PC and run a terminal emulation
program or Hyper Terminal and configure its communication parameters to match the following
default characteristics of the console port:
Baud Rate: 9600 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None
The settings of communication parameters
After finishing the parameter settings, click ‘OK’ button. When the blank screen shows up, press Enter
key to bring out the login prompt. Key in ‘admin’ (default value) for both User name and Password (use
Enter key to switch), then press Enter key and the Main Menu of console management appears.
Console login
15