Amer Networks SRPM24 - Manual (Page 18)

SRPM24
Commands Set List
User EXEC D
Privileged EXEC E
Global configuration C
PoE P
UPS U
System Commands Set
Commands Level Description Example
show system-info D Shows system information SRPM24>show system-info
show version D Shows version information SRPM24>show version
show config D Shows device configuration SRPM24>show config
show terminal E Shows console information SRPM24#show terminal
write memory C Save user configuration into
permanent memory (flash
rom) SRPM24#write memory
write terminal C Displays user configuration
on terminal SRPM24#write terminal
system name
[System Name]
C Configure system name SRPM24(config)#system name xxx
system location
[System Location]
C Set device system location
string SRPM24(config)#system location xxx
system description
[System Description]
C Set device system
description string SRPM24(config)#system description xxx
show system-info D
Shows system information SRPM24>show system-info
ip address
[Ip-address]
[Subnet-mask]
[Gateway]
C
Configure the IP address of
the device SRPM24(config)#ip address 192.168.1.1
255.255.255.0 192.168.1.254
ip dhcp
[Enable|Disable]
C
Enable DHCP client function
of the device SRPM24(config)#ip dhcp enable
reload C Reboot the device SRPM24(config)#reload
17