Amer Networks SRPM24 - Manual (Page 31)

SRPM24
Consumption - sum of power consumed by all ports.
Class - sum of all ports power according to their class, except for class 0 & 4 for which the actual
power consumption is summed.
Port Power Limit:
Predefined - user defined limit by port power limit.
Class - if PD’s power exceeds power according to its class.
Max - full power according to 802.3af (15.4W, 44V)
Start Condition:
N/A - no special condition
Class - start port only, if its maximum allowed power according to its class is higher than the user
defined power limit; except for classes 0-4 for which no start condition exists.
[Note]
PD class 1 power is 4w, PD class 2 power is 7w, PD class 0, 3, 4 power is 15.4w.
PoE Port Configuration
PoE Port Configuration
„ Port: Port 1 ~ port 24 are listed in this column for selecting.
„ Port State: Enable or disable the port being selected in the left column.
„ Power Limit Value: Set the power limit value to the port.
„ And then, click Apply
30