Amer Networks SRPM24 - Manual (Page 26)

SRPM24
User can configure the IP Settings and DHCP client function in here.
„ DHCP Client: Enable or disable the DHCP client function. When DHCP client function is enabled, the
managed PoE Midspan switch will be assigned an IP address from the network DHCP server. The
default IP address will be replaced by the assigned IP address on DHCP server. After the user click
Apply button, a popup dialog shows up to inform the user that when the DHCP client is enabled, the
current IP will lose and the user should find the new IP on the DHCP server.
„ IP Address: Assign the IP address that the network is using. If DHCP client function is enabled, the
user doesn’t need to assign the IP address. And, the network DHCP server will assign the IP address
displaying in this column for the PoE Midspan switch. The default IP is 192.168.16.1.
„ Subnet Mask: Assign the subnet mask to the IP address. If DHCP client function is enabled, the
user does not need to assign the subnet mask.
„ Gateway: Assign the network gateway for the PoE Midspan switch. The default gateway is
192.168.16.254.
„ And then, click Apply
IP configuration
Security Manager
Change login user name and password for management security.
„ User Name: Type in the new user name (The default value is “admin”).
„ New Password: Type in the new password (The default value is “admin”).
„ Confirm Password: Re-type the new password.
„ And then, click Apply button to make the configuration effective.
25